natural gas you should turn one of a circle while 1/8 circle for LPG.
When using bottled gas, the adjuster screw must be turned fully clockwise. The diameter of the by-pass is
stated in point“5.2 Burner and Nozzle Data Tables”.
When using town or natural gas, adjust the screw so that when the thermostat knob is turned from the
maximum to the minimum setting, the flame always remains stable and uniform. Close the oven door and
check that the burner remains on at the minimum setting.
5.1.2 Changing the nozzle
Undo the oven burner fixing screws
A
.
Move the burner
B
outwards until the nozzle is accessible.
Use a 7 socket wrench to change the nozzle, fitting the
one for the type of gas to be used (see point“5.2 Burner
and Nozzle Data Tables”).
5.1.3 Adjusting the oven burner primary air flow
Undo the adjuster screw“
A
”of the air regulator sleeve;
Turn the regulator sleeve“
Ｂ
”into the position for the
type of gas to be used, consulting the table below;
Tighten the adjuster screw and restore the seals;
When the operation is complete, reassemble the burner correctly.
NATURAL GAS (N) G30/G31 (LPG)
X= 4mm 10mm
When the operation is complete, replace the nameplate on the back of the oven with the one provided
for the new type of gas.
In compliance with current safety standards, adapting to different types of gas must be has gas lore of
professional can but operation.
