Campomatic AF20W, Инструкция по эксплуатации

Страница: 5 / 21

AF20
Before first use
1. Remove all packaging material.
2. Remove any stickers or labels from the appliance.
3. Thoroughly clean the basket and pan with hot water, some washing-up liquid and a non-abrasive
sponge.
Note: You can also clean these parts in the dishwasher.
4. Wipe the inside and outside of the appliance with a moist cloth.
This is an airfryer that works on hot air. Do not fill the pan with oil or frying fat.
Preparing for use
1. Place the appliance on a stable, horizontal and level surface.
Do not place the appliance on non-heat-resistant surfaces.
2. Place the vaned-plate at the bottom of the pan.
3. Place the basket in the pan properly
4. Put the pan into the machine.
Note: the pan MUST be put into the appliance properly, otherwise the appliance doesn’t work!
5. Pull the mains cord and plug into the earthed wall socket.
Do not fill the pan with oil or any other liquid.
Do not put anything on top of the appliance.
Do not put anything on the air-inlet on the two sides of the appliance, this disrupts the airflow
and affects the hot air frying result.
Using the appliance
The airfryer can prepare a large range of ingredients. Pls refer to the section “settings” table
hereinafter and the using guidance figures at last page.
Hot air frying
1. Put the mains plug into an earthed wall socket.
2. Carefully pull the pan out of the airfryer (fig.1).
3. Put the ingredients in the basket (fig.2).
Note: Never fill the basket in full or exceed the recommended amount ( see section ‘Settings’in this
chapter), as this could affect the quality of the end result.
4. Slide the pan back into the airfryer properly (fig.3).
Never use the pan without the basket in it.
If the pan doesn’t be fixed into the airfryer properly, the appliance won’t work!
Caution: Do not touch the pan during and some time after use, as it gets very hot. Only hold the
pan by the handle.
5. Turn the temperature control knob to the required temperature. See section’ Settings’ in this
chapter to determine the right temperature (fig.4)
6. Determine the required preparation time for the ingredient (see section ‘Settings’ in this chapter).
7. To switch on the appliance, turn the timer knob to the required preparation time (fig.5)
EN 5