Campo Equipment BLAZE 150E, Руководство по эксплуатации продукта

Страница: 8 / 24

8 Turn on heater settings as desired
(150kW= 60kW & 90kW combined)
CAUTION;
Failure to have proper air flow will cause heater to shut
down, it is imperative to maintain proper air flow.
NOTE:
The red light should come on and air should be pushed through the outlet
port. Check to see that only the red light is on.
Variable Speed Drive is pre-set for optimum air flow/
temperature rise. Based on “Heat Setting” selection, blower
will adjust speed. See Chart below:
TEMPERATURE SETTINGS
HEAT SETTING BTU/Hr. CFM TEMP.RISE
150kW 512,000 14,500 220F+
90kW 307,000 10,000 220F+
60kW 205,000 7,000 180F
FAN ONLY
0
14,500 N/A
SHUTDOWN
1 Move heat ON/OFF control setting to the "OFF" position
2 When cooling fan shuts down you may shut off power source
3 Shut off power source
4 Disconnect all power sources
5 Store heater
8