8
www.camplux.com
Visit Us: Camplux.com
8350 Patriot Blvd STE B, North Charleston, SC 29420
1(844) 538-7475
3. The unit should be connected directly to the main water supply. Flush pipe
with water to remove any debris or loose particles. Following pictures are for
your reference.
4. It is required that use 1/2
″ NPT water connections to fit the appliance. Please
connect the inlet and outlet pipe in perspective. Following pictures are for your
reference.
5. Please remember to install rubber seal rings at the connections. When all
water connections are completed, check for leaks and take corrective action
before proceeding.
Electrical Connection
1. All electrical work must comply with national and applicable state and local
electrical codes
2. All unit must be connected to a properly grounded dedicated branch circuit of
proper voltage rating.
3. While fed the cable to terminal blocks/Circuit Breaker, please make sure the
metal wire ends and the terminal blocks to touch completely. Then tighten the
screws up to make sure the full current can go through.
4. Before beginning any work on the electric installation, be sure that main
breaker panel switch is OFF to avoid any danger of electric shock, all mount-
ing and plumbing must be completed before proceeding with electrical
hook-up.
Upward Installation
Downward Installation
