Camplux ME40, Инструкция по установке и эксплуатации

Страница: 13 / 20

Page 13
Descaling the heating element cont.
3. To descale manually, let element dry and then using a non metallic brush similar to a tooth
brush; brush the residue from the element. Avoid damaging the surface of the element.
4. Reinstall the element and gasket.
5. Refill tank with water before pluging in the power cord .
Replacing the heating element :
1. Unplug and drain the water heater (see prior instructions).
2. Remove heating element noting original positions of all connections.
3. Install new element with gasket making sure the new element and gasket are positioned
correctly.
4. Tighten retaining nuts and make the wire connections to their original locations.
Changing the thermostat :
1. Unplug water heater power cord from the electrical outlet.
2. Drain and remove the water heater. (see page 12)
3. Remove six screws retaining the bottom panel of the water heater and remove the
panel.
4. Remove thermostat knob and unscrew two retaining screws. It may be necessary to pry the
knob off of the thermostat spindle. Now remove front panel.
5. Disconnect the push-pull wire connectors on the
thermostat noting which connector goes to
which terminal. Terminals are marked.
6. Remove the thermostat probe from the well.
7. Install new thermostat, attach wires and tighten
screws.
PAGE13
Thermostat