Instruction of Operation
To light griddle
Must read all steps carefully
1. Push the control knob in and turn counter-clockwise to the “Light” position.
2. If fire does not appear in 5 seconds, shut the burner control off, wait for 5 minutes, and repeat the lighting
procedure.
Use match for lighting
1. Don’t lean over the griddle while lighting. Ensure no gas leaks occur.
2. Control knob must be in the “OFF” position. Get the griddle top off.
3. Light a long match, then put the match on the right or left side of the burner.
4. Press the control knob in and turn counterclockwise to the “HIGH” position.
Be sure the burner lights and keep it lit.
Check burner fire
Remove the griddle plate or the grease cup before lighting as to visually check the fire. Light burner and turn knob
from high to low you will see a smaller fire in the low position and bigger in the high position.
Check the fire before each use. If you only see low flame, refer to Burner has low flame regardless of knob position
in the TROUBLESHOOTING GUIDE. Change the griddle plate or grease drawer before cooking.
Grease Cup
Low Flame
To turn off griddle
Turn the control knob to the “OFF” position.
Seasoning
Seasoning is baking oil into metal to make a sticky resistant surface and protect against oxidation.
There is a layer of soy oil on the appliance to protect against rust during transporting. It can be cleaned off with
warm soapy water when you begin your initial seasoning.
8
Visit Us: Camplux.com
8350 Patriot Blvd STE B, North Charleston, SC 29420
1(844) 538-7475
www.camplux.com
