Appendix A. Configuring the WXT510
6.
Go to the Device Settings Screen and enter the settings for each of the
parameters (see Figure A-2). Default settings are:
•
Device—Address: 0
•
Heating and self diagnostic—verify Enable Heating is NOT
selected.
•
Heating and self diagnostics—Update Interval: 15 s
•
Communication protocol—select SDI-12 v1.3
•
User port settings—Port type: SDI-12
FIGURE A-2. Device Settings Screen
7.
Click on the OK button.
8.
Go to the Sensor Settings Screen (see Figure A-3). The default Wind and
PTU Update intervals are set to 5 s.
FIGURE A-3. Sensor Settings Screen
A-2
