l
Cotton buds or swabs
l
Electronics-grade alcohol or suitable glass cleaner
l
Distilled water
The SurfaceVue 10 is designed to require minimal annual maintenance. Recommended
maintenance includes:
l
Check the cleanness of the surface-condition sensor window. Use a bulb air blower to
remove any large contaminants from the lens. Clean the lens with a lint free lens cloth or
lens tissue. Detergents suitable for cleaning glass can be used, when necessary.
l
Check the window of the surface-temperature sensor. Use a bulb air blower to remove any
large contaminants from the lens. Use a long cotton swab and wet with distilled water to
clean the window and then wipe it dry.
l
Check the air temperature and relative humidity measurements. If you suspect an error in
either of those measurements, or the dew point calculation, the sensor may need to be
serviced by the manufacturer.
l
(p. 16) for more information.
SurfaceVue 10 15
