FIGURE 1-1. Location of laser warning label
Before removing the laser module, the sensor must be physically disconnected from its power
supply to ensure that the laser is turned off.
1.5 Electrical safety
The sensor is powered from a low voltage supply (
(p. 10)), but potentially
hazardous voltages are generated within the internal electronics. Wiring of the power and data
cable should only be done by personnel qualified to install electrical equipment. For outside
installations, this usually requires a certified electrician who is familiar with local electrical and
safety legislation. Some general guidance is given in
(p. 17), but the
responsibility for the installation lies with the installer.
The unit is tested for electrical safety before dispatch but may need subsequent testing according
to local practice.
SkyVUE™8M Tactical LIDAR Ceilometer
4
Содержание SkyVUE 8M
Страница 1: ...Revision 11 2020 Copyright 2020 Campbell Scientific Inc ...
Страница 105: ...SkyVUE 8M Tactical LIDAR Ceilometer 100 ...