SC-USB USB to CS I/O Opto-isolated Interface
4
A separate installer program will start if you have selected the appropriate driver
set for your copy of Windows.
After clicking on Next the drivers will be installed and the program should
complete with this screen at which point you can close the installer and the CD
program (unless you wish to use the utility or view the help or manuals).
Once this step has been reached click on “Finish” and then you can proceed to
connect the SC-USB to your computer.
3.1 Installing the SC-USB for the first time
Connect the SC-USB to a spare USB port on your PC. If the drivers have been
installed on the machine using the process above the PC should find the correct
drivers and after going through two cycles of finding and installing drivers the PC
should show the newly found USB device and display a message that the device is
ready to use. If you have upgraded the drivers you may then be asked to reboot
your computer before using the interface.
