Campbell RAWS-P, Инструкция по эксплуатации

Страница: 7 / 34

RAWS-P Remote Automated Weather
Station
1. Introduction
The RAWS environmental enclosure can be used for configuring a custom
Remote Automated Weather Station (RAWS) that matches the requirements of
your application. The aluminum environmental enclosure houses a 12 V
rechargeable battery and a CR1000 datalogger. The outside of the enclosure
has color-coded, keyed connectors (Figure 1-1) for attaching the sensors.
Besides the connectors, a wiring panel is included that allows the measurement
of additional sensors. Communication options include satellite transmitter and
voice radio interface module. Additional communication equipment
(telephone, cellular phone, radio) can be added to the station. The RAWS data
collection platform is ideal for configuring a custom remote automated weather
station.
FIGURE 1-1. Color Coded, Keyed Connector Panel
The RAWS-P comes with a generic program. Modifications to
this generic program will require datalogger support software
(LoggerNet or PC400) purchased from Campbell Scientific, Inc.
Please contact a Campbell Scientific Application Engineer for
programming assistance. Campbell Scientific company contact
information is listed on the last page of this manual.
NOTE
1