Campbell RAWS-P, Инструкция по эксплуатации

Страница: 21 / 34

RAWS-P Remote Automated Weather Station
The TX312 transmitter has two siting requirements for proper operation. The
GOES antenna must have a clear view of the spacecraft. The GOES antenna is
directional and should be aimed at the spacecraft. Both elevation and azimuth
are unique to the location of the planet and must be set. A poorly aimed
antenna will cause a drop in signal strength or possibly prevent successful
transmission.
For more information on the GOES transmitter (part #TX312) and antenna
siting, go to our website at www.campbellsci.com , enter the “TX312” in the
“Search” box on the website mentioned above, and go the equipment manual.
The GOES transmitter (part #TX312)
manual is also provided on the Resource
CD which ships with the RAWS Quick Deployment Weather Station.
The spacecraft specific DCP-Setup parameters for the GOES
transmitter must be entered in the CR1000KD menus for the
GOES transmitter TX312 to work properly. If the RAWS Quick
Deployment Weather Station does NOT have a GOES
transmitter disregard the DCP-Setup parameters. NOTE
RF Out: Connects to the antenna
cable’s type N male connector.
FIGURE 5.4-1. GOES Transmitter
15