Campbell Raven110, Инструкция по эксплуатации

Страница: 18 / 36

Raven110 GPRS AirLink Cellular Modem
14
Unless you click the Write command, changes made in the New
Value field will not be sent to the modem. For some changes
(e.g., baud rate) you must also
Reset the modem before the
changes will take effect.
The tunnel software from Motient must be running on the host
computer for communications to be established with the
datalogger.
5.4 Configuring the Raven for Dynamic IP
Dynamic IP addresses are granted only when a modem or other device is
connected and can change each time the modem or device reconnects to the
network.
IP Manager translates a dynamic IP address to a fully qualified domain name
so you can contact your Raven by name as if it had a static IP. IP Manager is a
free service provided by AirLink for the Raven to translate a dynamic IP
address into a fully qualified domain name so it can be contacted directly on
the Internet.
If the Raven is configured for Dynamic IP, when the Raven first connects to
the Internet, it sends an IP change notification to IP Manager. IP Manger will
acknowledge the change and update the DNS record. The changed IP address
will then be the address for the Raven’s configured name. Once the Raven’s IP
has been updated in IP Manager, it can be contacted via name.
Wireless ACE 3G is used to configure the Dynamic IP settings in your Raven
so that it will use IP Manager as described below.
Connect with modem using Wireless Ace 3G. In Wireless ACE, select
Dynamic IP to configure your modem to use IP Manager.
To configure your AirLink modem to be addressed by name, the modem needs
to have four elements configured.
1. Modem name: A unique name for the modem (some people use the
MSISDN number provided with the account).
2. Domain: The domain name to be used by the modem.
3. IP Manager IP Address: The IP or domain name of the dynamic DNS
server which is running IP Manager.
NOTE
NOTE