Campbell Raven100, Инструкция по эксплуатации

Страница: 27 / 38

Appendix A. Wireless Ace Setup
without Template File
Wireless Ace 3G is used to program settings in the Raven100 and Raven110
modems to make the modems compatible with CSI dataloggers. Airlink
CDMA and GPRS template files to send the modems are available on the CSI
website (
http://www.campbellsci.com/downloads ). The procedure for sending
the template files is described in Section 5.2.
When the template files are not available, Wireless Ace 3G can be used to
change the settings described below.
For a direct connection on a COM port use PPP.
Make a note of the Device port (*DPORT). The default is 12345 and we use
3001 in our template. Any valid port can be used. This is the port number
used in LoggerNet to get to the datalogger.
A-1