Campbell Raven II, Инструкция по эксплуатации

Страница: 6 / 16

Raven II Digital Cellular Modem
2
gives the specific modem configuration and the field installation for use with a
Campbell Scientific datalogger.
3. Configuration
Section 2 of the AirLink manual describes getting the required information
from your CDPD service provider, installing the software and configuring the
modem. The easiest way to set the configuration for a Campbell Scientific
datalogger is to use a template file. The template file is available at Campbell
Scientific’s FTP resource page:
http://www.campbellsci.com/resource.html
Alternatively you can change the parameters manually. Appendix A lists the
CSI template which gives the settings for each parameter.
Follow all the steps in Section 2 of the AirLink manual up through Section 2.3
step 12 (“ If you know of other parameters you have to change…” ). At this
point if you have copied the CSI template file you can load it. Select “ Open
Template” from the file menu: