Campbell Raven II, Инструкция по эксплуатации, Страница: 15 / 16

A-1
Appendix A. Configuration for use with
CSI Dataloggers
[\N] Side Preference=3
[S110] Device Port=3001
[S116] Service ID Preference=3
[S111] Service ID=0/0/0
[S112] Channel List Mode=2
[S113] Channel
List=715,706,708,790,793,792,796,794,791,798,795,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0
[3W] 3 Watt Booster Support=0
[*DSIDE] Disable Side Switch=0
[#X] Debug Output=0
[S0] TCP Auto Answer Mode=1
[S7] TCP Establishment Timeout=20
[S50] Data Forwarding Timeout=1
[S51] Data Forwarding Character=0
[S53] Destination IP Address=0.0.0.0
[S53] Destination TCP/UDP Port=23
[S53] Destination Connect Mode=T
[S210] AT Command Compatibility=1
[S211] Ignore DTR=1
[MD] Startup Mode Default=0
[MD] UDP Mode Default=0
[S60] Telnet Echo Mode=0
[S82] UDP Half Open Mode=0
[S83] UDP Half Open Timeout=0
[AIP] Allow Any UDP IP=0
[HOR] UDP Half Open Response=0
[S220] Break On TCP Connect=0
[S221] Delay Connect Response=0
[E] Command Echo=1
[V] Command Response Mode=1
[Q] Quiet Mode=0
[X] Call Progress Result Mode=0
[TCPT] TCP Inactive Timeout=5
[TCPS] Specify TCPT in Seconds=0
[TCPX] Allow TCP Suspension=0
[*DATZ] Disable Reset on ATZ=1
[DAE] Disable AT Esc Sequence=1
[RKEY] Radio Transceiver Keying=0
[\Q] Flow Control=0
[S23] Baud Rate=9600
[S23] Data Bits=8
[S23] Parity=N
[MVOFF] Modbus-Variant Offset=1
[MVLEN] Modbus-Variant Length=0
[MVTYP] Modbus-Variant Type=0
[MVOPT] Modbus-Variant Options=0
[MVMSK] Modbus-Variant ID Mask=0
[FM] Friends Mode=0