On cables and cabled items, the model number is usually found at the connection end of
the cable. Report any shortages immediately to Campbell Scientific.
4. QuickStart
A
video
that
describes
data
logger
programming
using
Short
Cut
is
available
at:
logger-getting-started-program-part-3
Short
Cut
is
an
easy
way
to
program
your
data
logger
to
measure
the
sensor
and
assign
data
logger
wiring
terminals.
Short
Cut
is
available
as
a
download
on
It
is
included
in
installations
of
LoggerNet
,
RTDAQ
,
PC400
,
and
PC200W
.
The
following
procedure
also
shows
using
Short
Cut
to
program
the
RainVUE-series.
1. Open
Short Cut
and click Create New Program.
2. Double-click the data logger model.
3. In the Available Sensors and Devices box, type RainVUE or find the sensor in the Sensors >
Meteorological > Precipitation folder, and double-click RainVUE10/RainVUE20 Rain
Gauge. Enter the correct SDI-12 Address for the sensor if it has been changed from the
factory-set default value. Type the numeric month and day for resetting the total
accumulation if you want to do this. Otherwise, uncheck the Reset total intensity corrected
accumulation once a year box.
RainVUE-Series SDI-12 Precipitation Sensors
2