m/s
m
1.14
0.81
0.96
1.00
m/s
m
0.96
0.85
11:01:56
0.96
1.00
1.00 m
V
0.12 m/s
SNR
40 dB
0.96 m
15.5 oC
10.0 V
0.96
Completed
Vertical nr.1
Position :1.00
Avg. Velocity :0.57
Points :2
Next Vertical[2]
1.Position :2.00
2.Depth :1.35
3.Gauge :2.48
4.Define Obstruction
Punkt #3
Vertical nr. :02
1.Position :2.00
2.Water Depth:1.80
3.2 Points
4.End this Vertical
Completed
DISCHARGE
MEASUREMENT
COMPLETED.
Discharge Measurement
Name: ILLER5
Discharge: 0.110
1.Details
2.End
3.Continue
Discharge-Details
Measure Method
2 Points
Using MID-section
Averaging: 30S
Vertical[1]
1.Position :1.00
2.Depth :1.20
3.Gauge :2.48
4.Define Obstruction
Obstruction
1.First Edge :1.00
2.Last Edge :1.50
3.Width :0.50
Edges
1.First Edge : 0.00
2.Last Edge :10.00
3.Streamwidth:10.00
Iller5
Discharge : 0.110
Avg. Velocity : 0.830
Avg. Depth : 1.550
Area : 6.240
1.Settings
2.Name:ILLER5
3.Party:SB&FR
4,Notes
5.START
Discharge Measuring
Start Measuring
Name:ILLER5
Strem width:10.00
Verticals :11
Measure points:22
Point #1
Vertical nr. :01
1.Position :1.00
2.Water Depth:1.20
3.2 Points
4.End this Vertical
All verticals have been completed.
Continue: Press
key.
Adjust edge parameters as necessary.
Continue: Press
key.
Step 3: Carry out discharge measurement
Press key 5.
Enter file name in subsequent
window if necessary.
Confirm: Press
key.
Show details: Press
key.
Starting measurement: Press
key.
Lower sensor to bottom.
Press key 2.
Confirm water depth: Press
key.
If required, call verticals information:
Press
key.
Enter level if required: press key 3.
Enter parameters for obstruction if necessary:
press key 4.
Continue: Press
key.
Measurement runs for
the set time interval.
Accept measurement results: Press
key.
Continue with measure point 2 as described above.
or
Reject measurement: Press
key.
Repeat measurement.
Vertical 1 is finished.
Continue: Press
key.
Continue with vertical 2.
Continue with measure point 3 as described above.
Continue until all verticals have been processed.
Display additional information:
press key 1.
End measurement:
Press key 2 and confirm the
query with
key in the
subsequent window.
Position sensor at preset depth (in example ).
The symbol for the preset depth (set submersion depth)
blinks until the sensor position is correct.
Starting measurement: Press
key.
Display details for the individual
verticals: Press
key.
