?
10:55:16
-.--
0,01
m
0.01
0.01
Main Menu
[1/2]
1.Discharge
2.Depth Calibration
3.View Data
Calibrated
At :0.00 m
Measured :0.01 m
Offset :941 mBar
m/s
Calibrate at:
0.00 m
Sensor Reading:
Depth Calibration
Position sensor at
calibration depth.
Press
key to start
the calibration.
Press
key.
Call main menu:
press
■
key.
Press key 2.
Requirements: the sensor is outside of the water.
Step 1: depth calibration
Example: Discharge measuring – step by step
Entering characters
Characters are entered via the keyboard of the handheld unit.
Depending on the operational situation, the entry of numbers or
text is possible in the individual entry mask.
Numbers, "
..
"and "-" : press relevant key once.
Text: press relevant key 1x, 2x, 3x or 4x until the required cha-
racter is shown in the display.
Delete character:
press
◆
key.
Confirm entry:
press
■
key.
0_
Near Edge
Position [0.0..1000.0]
Example: input mask
Overview of main menu
Call main menu: Press
■
key
(after switching on the handheld unit and, dependent on the
current operational situation, within submenus).
Call submenu: press the relevant number for the respective
submenu.
?
Main Menu
[1/2]
1.Discharge
2.Depth Calibration
3.View Data
Main Menu
[2/2]
1.Delete files
2.System Status
3.System settings
4.Advanced
Depth Calibration
Calibrate at:
0.00 m
Sensor Reading:
0.02
0.02
2.
System Info
Free Memory:
99%=59084 Points
Battery :50%
Serial Nr. :ADC 1038
FW: 1.03 / 114
2.
Data Files
1:Iller1 10:25 18/05
2:Iller2 13:37 18/05
3:Iller3 09:12 21/05
4:Durach1 14:06 24/05
5:Durach2 10:24 25/05
3.
System Menu
1.Date and Time
2.Display
3.Sound level
3.
1.Language
2.Key Sound
[ON]
3.Units
4.Format Recorder
5.Reset
4.
1.
Discharge Measuring
1.Settings
2.Name:***
3.Party:
4.Notes
5.START
Delete
1:Iller1 10:25 18/05
2:Iller2 13:37 18/05
3:Iller3 09:12 21/05
4:Durach1 14:06 24/05
5:Durach2 10:24 25/05
1.
Advanced
Calibrating the sensor for depth
measurement.
Call information on saved file.
Setting parameters for discharge
measuring.
Enter file name.
Enter name for party.
Enter notes.
Start measurement.
1
2
3
4
5
Deleting saved file.
Enter hours, minutes, seconds
and year (2-digit).
Set display and frequency
of the measured value display.
Set volume.
1
2
3
Select display language.
Switch key sounds on/off
Select units (metric/imperial).
Delete memory.
Carry out a reset (all settings are
reset.)
1
2
3
4
5
Main Menu Part 1
Main Menu Part 2
