User Manual
3
c.
Under the TCP/IP tab, input the
IP Address
,
Subnet Mask
, and
IP Gateway
.
These values should be provided by your network administrator.
Alternatively, note the
Eth IP
address assigned to the datalogger via DHCP.
Note, however, that this address is not static and may change.
Figure 4-2. DevConfig setup
d.
Press the
Apply
button to save the changes and then close
DevConfig
.
A temporary IP address may be obtained from a DHCP server. For
more information, se
e Section
6.8
,
DHCP
(p. 15)
.
The NL121 must be connected to the datalogger before configuring
the datalogger with
DevConfig
. If it is not connected, the TCP/IP
settings will not be displayed.
NOTE
NOTE
