Campbell NL116, Инструкция по эксплуатации

Страница: 30 / 44

NL116 Ethernet and CompactFlash ® Module
•
Command 2 copies the specified program to the designated drive. The
program specified in command 2 will be set to Run Always unless
command 6 or 14 is used to set a separate Run Now program.
•
Command 5 formats the designated drive.
•
Command 6 copies the specified program to the designated drive and sets
the run attribute of the program to Run Now. Data on a CF card from the
previously running program will be preserved.
•
Command 7 copies the specified file to the designated drive with no run
attributes.
• Command 13 copies the specified program to the designated drive and sets
the run attribute of the program to Run Always. Data on a CF card from
the previously running program will be erased.
• Command 14 copies the specified program to the designated drive and sets
the run attribute to Run Now. Data on a CF card from the previously
running program will be erased.
7.2.3.3 Program Execution
After File is processed, the following rules determine what datalogger program
to run:
1) If the Run Now program is changed, it will be the program that runs.
2) If no change is made to the Run Now program, but the Run on Power-up
program is changed, the new Run on Power-up program runs.
3) If neither the Run on Power-up nor the Run Now programs are changed,
the previous Run on Power-up program runs.
7.2.3.4 Example Powerup.ini Files
Examples 7-2 through 7-7 are example powerup.ini files.
EXAMPLE 7-2. Run Program on Power-up.
'Copy pwrup.cr1 to USR:, will run only when powered up later
2,pwrup.cr1,usr:
EXAMPLE 7-3. Format the USR: Drive.
'Format the USR: drive
5,,usr:
EXAMPLE 7-4. Send OS on Power-up.
'Load this file into FLASH as the new OS
9,CR1000.Std.28.obj
22