Campbell NL115 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 42

Campbell NL115 Скачать руководство пользователя страница 19

NL115 Ethernet and CompactFlash

®

Module

In order to use FTP, the datalogger’s FTP User Name and FTP Password must
be set. This is done using Device Configuration Utility.

Step 1 – Configure Datalogger

a.

Connect serial cable from PC COM port to datalogger RS-232 port.

b.

Open Campbell Scientific’s Device Configuration Utility. Select the
device type of the datalogger (CR1000 or CR3000), the appropriate Serial
Port and baud rate. Connect to the datalogger.

e.

Under the Net Services tab, verify that FTP Enabled is checked. Input the
FTP User Name and FTP Password.

f.

Press the Apply button to save the changes and then close the Device
Configuration Utility.

Using “anonymous” as the user name with no password allows
FTP access without inputting a user name or password.

NOTE

Step 2 – Access File System

a.

Datalogger must be set up for Ethernet communications as explained in
Section 4.1,

Physical Set-up

and 4.2,

Communicating via Ethernet

(Step 1

only).

b.

Open a Windows Explorer window. Enter

ftp://username:[email protected]

where nnn.nnn.nnn.nnn is the

IP address of the datalogger.

If the user name is “anonymous” with no password, enter

ftp://nnn.nnn.nnn.nnn

where nnn.nnn.nnn.nnn is the IP address

of the datalogger.

NOTE

7.1.3.2 FTP Client

The datalogger can also act as an FTP Client to send a file to or get a file from
an FTP Server; for example, another datalogger or web camera. This is done
using the

FTPClient()

instruction. The following program is an example of

using the

FTPClient()

instruction to send a file to another datalogger and get a

file from that datalogger. The first parameter in the instruction is the

FTP

Server’s IP address

. The second parameter is the

FTP username

. The third

parameter is the

FTP password

. The fourth parameter is the

local filename

.

The fifth parameter is the

remote file name

. The final parameter is the

put/get

option

: 0 for put and 1 for get. The instruction returns –1 if the instruction

was successful and 0 if it was not.

13

«
...
17
18
19
20
21
...
»

Содержание NL115











































Отзывы:

Нет отзывов