1
Met One 034B Wind Set
1. Introduction
The 034B Wind Set combines a 3-cup anemometer and vane into a single
integrated package to measure wind speed and direction. It is cabled for use
with our dataloggers, and can provide measurements for a variety of
applications.
This manual provides information only for CRBasic dataloggers.
It is also compatible with most of our retired Edlog dataloggers.
For Edlog datalogger support, see an older manual at
www.campbellsci.com/old-manuals
Scientific.
2. Precautions
•
section at the front of this
manual.
•
The 034B is a precision instrument. Please handle it with care.
•
If the 034B is to be installed at heights over 6 feet, be familiar with tower
safety and follow safe tower climbing procedures.
•
Danger—Use extreme care when working near overhead electrical wires.
Check for overhead wires before mounting the 034B or before raising a
tower.
•
The set screw holes must be covered with labels to prevent corrosion and
assure the warranty.
•
The black outer jacket of the cable is Santoprene® rubber. This compound
was chosen for its resistance to temperature extremes, moisture, and UV
degradation. However, this jacket will support combustion in air. It is rated
as slow burning when tested according to U.L. 94 H.B. and will pass
FMVSS302. Local fire codes may preclude its use inside buildings.
3. Initial Inspection
Upon receipt of the 034B, inspect the packaging and contents for damage. File
damage claims with the shipping company. Immediately check package contents
against the shipping documentation (see Section
(p. 2)
).
Contact Campbell Scientific about any discrepancies.
The model number and cable length are printed on a label at the connection end
of the cable. Check this information against the shipping documents to ensure
the expected product and cable length are received.
NOTE
