Campbell KPSI Series, Инструкция по эксплуатации

Страница: 10 / 18

Using the CS400/CS405 Submersible Pressure Transducer with Campbell Scientific Dataloggers
4
FIGURE 3-1. Wiring diagram for a CS400/CS405 and a DES-2
connected to a BDR301.
3.8 PST3/8
The PST3/8 has a #7977 built-in. Figure 3-2 shows the wiring for a
CS400/CS405 and a DES-1 which can be connected to the PST3/8.
FIGURE 3-2. Wiring diagram for a CS400/CS405 and a DES-1 for use
with the PST3/8.
4. Programming
The example programs below enable the datalogger to collect and process data
and store it in input storage locations.
Additional instructions are needed to output data to final storage.
For example, time periodic output might include instructions
P92, P77, P70, etc.
NOTE