Appendix C. PS24 24 Ah Power Supply and 10 x 12 inch Enclosure
C-10
FIGURE C-10. Procedure for installing and connecting battery
The power cable that carries the regulated 12 Vdc power from the
regulator in the external enclosure to the ET107 station enclosure
has a two-pin connector on one end and tinned wires on the other.
13.
Toggle the power switch on the regulator (CH100, PS100, CH150, or
PS150) to the
OFF
position.
14.
Wire the power cable to the regulator (TABLE
).
TABLE C-2. Power Cable-to-Regulator Connection
Wire Color
Regulator Connection Terminal
Red
12V
or
+12V
Black
G
15.
Plug the two-pin connector into the
POWER
connector on the back of the
station.
NOTE