ET107 Weather Station
5
Straight bit screwdrivers (small, medium, large)
Phillips-head screwdrivers (small, medium)
Small diagonal side-cutters
Needle-nose pliers
Wire strippers
Pocket knife
Calculator
Volt / Ohm Meter
Electrical Tape
Step ladder (6 ft)
Station manuals
Station log and pen
Open end wrenches: 3/8 in, 7/16 in, 1/2 in, 9/16 in, 15/16 in
Socket wrench and 7/16-inch-deep well socket
Adjustable wrench
Pliers
Conduit and associated tools (as required)
Felt-tipped marking pen
Claw hammer
Pipe wrench (12 in)
Handheld drill/driver with 3/8-inch hex driver bit
Drill with 7/32-inch drill bit
4.4 Supplies for Power and Communications Options
AC Power
Wire, conduit, and junction boxes as needed (FIGURE
FIGURE 4-1. ET107 pole installation with currently-available AC power
option