Campbell ENC 10/12, Руководство по эксплуатации продукта

Страница: 38 / 51

FIGURE B-2. Determining the DIN-rail mounting hole locations
3. Insert grommets into the two holes noted in step 2 ( FIGURE B-3 (p. 32)). Secure the DIN rail
to the backplate with the screws and washers included with the DIN rail. If a ground wire is
included, slide the eyelet on one end of the ground wire over one of the mounting screws
prior to securing the DIN rail. The other end of the ground wire is secured to the enclosure
ground terminal.
FIGURE B-3. Mounting the DIN rail and ground wire
4. Determine the mounting order for the DIN-rail components. The order of components
should provide for the simplest wiring later. Avoid positioning components so wires must
pass back and forth over other components. It is also beneficial to mount components with
the same profile next to one another to reduce the number of spacers and end caps
required.
Enclosures 32