manualshive.com logo in svg

Campbell csi mAXON, Инструкция по эксплуатации

Поделиться
Скачать
Campbell csi mAXON Скачать руководство пользователя страница 2

Warranty and Assistance 

The

 

CSI MAXON RADIOTELEMETRY NETWORK 

is warranted by 

CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and 
workmanship under normal use and service for twelve (12) months from date 
of shipment unless specified otherwise.  Batteries have no warranty.  
CAMPBELL SCIENTIFIC, INC.'s obligation under this warranty is limited to 
repairing or replacing (at CAMPBELL SCIENTIFIC, INC.'s option) defective 
products.  The customer shall assume all costs of removing, reinstalling, and 
shipping defective products to CAMPBELL SCIENTIFIC, INC.  CAMPBELL 
SCIENTIFIC, INC. will return such products by surface carrier prepaid.  This 
warranty shall not apply to any CAMPBELL SCIENTIFIC, INC. products 
which have been subjected to modification, misuse, neglect, accidents of 
nature, or shipping damage.  This warranty is in lieu of all other warranties, 
expressed or implied, including warranties of merchantability or fitness for a 
particular purpose.  CAMPBELL SCIENTIFIC, INC. is not liable for special, 
indirect, incidental, or consequential damages. 

Products may not be returned without prior authorization.  The following 
contact information is for US and International customers residing in countries 
served by Campbell Scientific, Inc. directly.  Affiliate companies handle 
repairs for customers within their territories.  Please visit 
www.campbellsci.com to determine which Campbell Scientific company 
serves your country.  To obtain a Returned Materials Authorization (RMA), 
contact CAMPBELL SCIENTIFIC, INC., phone (435) 753-2342.  After an 
applications engineer determines the nature of the problem, an RMA number 
will be issued.  Please write this number clearly on the outside of the shipping 
container.  CAMPBELL SCIENTIFIC's shipping address is: 

 

 

CAMPBELL SCIENTIFIC, INC. 

 RMA#_____ 
 

815 West 1800 North 

 

Logan, Utah 84321-1784 

 

CAMPBELL SCIENTIFIC, INC. does not accept collect calls. 

 

 

 

Содержание csi mAXON











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды