![background image](http://html1.mh-extra.com/html/campbell/cs705/cs705_product-manual_3722162012.webp)
Do the following to assemble the mounting bracket.
(p. 8) and
show the bracket components and the proper assembly.
1.
Remove
the
components
from
the
shipping
bag.
To
assemble
the
bracket,
you
will
need
the
bottom
plate,
V-shaped
plate,
S-shaped
plate,
three
bolts,
two
leve
l
ling
springs,
and
cylindrical
spacer.
The
bottom
plate
should
come
with
three
black
nylon
grommets
mounted
into
it,
and
the
pole
mounting
hardware
attached
to
it.
2.
Place
the
leve
l
ling
springs
over
the
bottom
plate’s
side
grommets.
3.
Place
the
V-shaped
plate
onto
the
bottom
plate.
The
V-shaped
plate’s
legs
should
be
on
the
leve
l
ling
springs
and
the
bubble
level
should
be
next
to
the
pole-mounting
hardware.
4.
Use
two
bolts
to
secure
the
V-plate
legs
to
the
bottom
plate
(with
the
springs
sandwiched
between
the
two
plates).
Initially
finger
tighten
the
bolts
and
then
use
a
wrench
to
further
tighten
them.
CAUTION:
Do not compress the springs at this time.
5. Place the cylindrical spacer on the bottom plate’s front grommet.
6. Place the S-shaped plate on the spacer and use the bolt to secure it to the bottom plate.
Initially finger tighten the bolt and then use a wrench to further tighten. Leave it a bit loose.
CS705 Snowfall Adapter
7