Campbell CS300, Руководство по эксплуатации продукта, Страница: 18 / 26

CS300 and CS301 Pyranometers
8
7.3 Wiring to the Datalogger
FIGURE 7-1 provides a schematic diagram.
500 to 600

typical
Single-Ended
Analogue
Input
Ground/
⏚
Ground/
⏚
FIGURE 7-1. Schematic diagram
Connections to Campbell Scientific dataloggers are given in TABLE 7-1 .
When Short Cut is used to create the datalogger program, connect the sensor to
the terminals shown in the wiring diagram created by Short Cut .
TABLE 7-1. Wire Colour, Function, and Datalogger Connection
CS300
Wire
Colour
CS301
Wire
Colour
Wire
Function Datalogger Connection Terminal
Red White Signal
U configured for single-ended
analogue input
1
, SE (single-ended,
analogue-voltage input)
Black Black
Signal
Reference
⏚
(analogue ground)
Clear Clear Shield
⏚
(analogue ground)
1
U terminals are automatically configured by the measurement instruction.
7.4 Programming
Short Cut is the best source for up-to-date datalogger programming code.
If data acquisition requirements are simple, a datalogger program can probably
be created and maintained exclusively with
Short Cut . If the data acquisition
needs are more complex, the files that Short Cut creates are a great source for
programming code to start a new program or add to an existing custom
program.
Short Cut cannot edit programs after they are imported and
edited in CRBasic Editor .
A Short Cut tutorial is available in Section 4 , QuickStart
(p. 1)
. To import Short
Cut code into CRBasic Editor to create or add to a customized program, follow
NOTE