Campbell CR9000X, Инструкция по эксплуатации

Страница: 5 / 24

OV-1
Overview
The CR9000X is a modular, multi-processor system that provides precision measurement capabilities
in a rugged, battery-operated package. The system makes measurements at a rate of up to 100 K
samples/second with 16-bit resolution. The CR9000X Base System includes CPU, power supply, and
A/D modules. Up to nine I/O modules are inserted to configure a system for specific applications.
The on-board, BASIC-like programming language includes data processing and analysis routines.
PC9000 Windows
™
Software provides program generation and editing, data retrieval, and realtime
monitoring. LoggerNet software can be used for multiple station applications requiring modem
communications and/or where schedule data collection to a PC is required.
CR9000
AC A
DAP
TOR
FIGURE OV1-1. CR9000X Measurement and Control System
OV1. Physical Description
OV1.1 Basic System
CR9032 CPU Module
The CR9032 CPU Module provides system control, processing, and
communication to a PC via the built-in 10BaseT/100BaseT Ethernet port or the
RS-232 port. The CR9032 also has built-in Serial Device for Measurement
(SDM) terminals and a CSI 9-pin port for communication with Campbell
Scientific peripherals. The SDM 12 volt supply is current limited to 1.85
amps. The main processor is a 180 MHz Hitachi SH-4 microprocessor. The
module has 128 MB SDRAM and 2 MB Flash EEPROM.