Campbell CR3000 Micrologger, Руководство оператора

Страница: 449 / 644

Section 8. Operation
449
Memory Card States
CardStatus CardBytesFree CompileResults LED Status
Card OK >0 Formatted card inserted, powered up.
>0 Solid green for 20 s
Card still inserted, but removal button has been
pressed.
-1
CFM100/NL115 removed while logger is
running (do not do this).
>0
Program contains CardOut() or TableFile()
with Option 64. Card inserted before power up.
No Card Present -1 Powered up, no card present.
-1
Card ejected / physically removed
-1 Logger started without CFM100 / NL115.
•
No Card
Present
•
Card Not
Being Used
-1
Compact Flash
Module not
detected: CardOut
not used.
Program contains CardOut() or TableFile()
with Option 64. CFM100/NL115 not attached
at power up.
-1 Solid orange
Program contains CardOut() or TableFile()
with Option 64. Card not present at power up.
Initializing Table
Files! Dim / fast flashing
orange
Program contains CardOut() or TableFile()
with Option 64. Card not present at power up.
Card inserted after power up. If all goes well,
CardStatus will change to Card OK and
CardBytesFree
(p. 578)
will be >0.
8.8.2 Data File Formats
Data file format options are available with the TableFile() instruction. Time-
series data have an option to include header, time stamp and record number. See
the table TableFile() Instruction Data File Formats
(p. 449).
For a format to be
compatible with datalogger support software
(p. 90)
graphing and reporting tools,
header, time stamps, and record numbers are usually required. Fully compatible
formats are indicated with an asterisk. A more detailed discussion of data-file
formats is available in the Campbell Scientific publication LoggerNet Instruction
Manual, which is available at www.campbellsci.com.
TableFile() Instruction Data File Formats
TableFile()
Format
Option
Base
File
Format
Elements Included
Header
Information
Time
Stamp
Record
Number
0
1
TOB1
  
1
TOB1
 