Campbell COM111 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 72

Campbell COM111 Скачать руководство пользователя страница 21

Using with Campbell Scientific Dataloggers

9

on” data connections, e.g. with smart phones. This technology offers many
potential advances in remote telemetry. These include:



Fast connection time compared to landline modem – as fast as a few
seconds



Lower cost of data transfer



Always on connection – if your system has the power to keep a
modem powered all the time then it is possible to set-up a system
that is “always-on” which can be connected from anywhere on the
net at any time



Higher speed data transfer from the data logger back to the PC



Easy access from anywhere in the world



Alternative ways of accessing data in the data logger due to it being
connected to an IP network.

Those alternative ways include:



Direct Loggernet IP Pakbus communications



Supports a telnet connection (like the serial terminal mode),
including talk-through modes to serial sensors connected to the data
logger.



Supports Modbus and DNP3 over IP



Supports serving webpages – which are user defined



Supports requesting data with http commands



Supports acting as an ftp (file) server.

Plus, under program control:



Can send email messages (emailsend)



Can send files by ftp (ftpclient)



Can synchronise the data logger clock to Internet time
(networktimeprotocol).



Can send data to other loggers via IP (Send/Get variables, files and
data)



Can do a normal callback to a Loggernet server (send variables)



Can do a one way transmission to Loggernet or another logger
(Senddata)



Can open virtual serial ports to other dataloggers or sensors via the
IP network.

Only  standard  Pakbus  communication  with  Loggernet  is
possible  if  using  the  TCP/IP  function  built  into  the  modem.
The  other  advanced  communications  options  require  a  data
logger  capable  of  running  its  own  TCP/IP  “stack”.    Those
loggers  currently  include  the  CR6,  CR300,  CR800  series,
CR1000 and CR3000 dataloggers.

NOTE

«
...
19
20
21
22
23
...
»

Содержание COM111









































































Отзывы:

Нет отзывов