Campbell CM106BK, Руководство по эксплуатации продукта

Страница: 23 / 34

CM106BK Tripod Kit
17
5.8 Crossarm Attachment
For a video demonstrating how to attach a crossarm to a tripod, see
www.campbellsci.com/videos/tripod5 .
Attach the CM202 (0.6 m, 2 ft), CM204 (1.2 m, 4 ft), or CM206 (1.8 m, 6 ft)
crossarm to the tripod mast as shown in FIGURE 5-9 . For wind sensors, the
crossarm should be approximately 261.6 cm (103 in) above the ground.
Typically the crossarm is oriented East/West for wind sensors, North/South for
pyranometers.
FIGURE 5-9. CM204 Crossarm
5.9 Enclosure Attachment
The ENC10/12, ENC12/14, ENC14/16, and ENC16/18 enclosures can be
ordered with mounting brackets for the CM106BK tripod. All enclosure
models can be mounted to the tripod mast (above the legs) with the –MM Mast
Mount bracket option. The –LM Leg Mount bracket option allows all enclosure
models to be mounted to the tripod base. Two enclosures with the
–LM brackets can be mounted in a “back to back” configuration.
5.9.1 Enclosure Mounting to Tripod Mast
For a video showing how to mount an enclosure to the tripod mast, see
www.campbellsci.com/videos/tripod4 .
An enclosure ordered with the –MM bracket has a three-piece top and bottom
brackets with a U-bolt for each bracket.
Attach an enclosure with the –MM mounting bracket to the tripod mast as
follows:
Remove the U-bolts, washers, and nuts from the brackets.
CM200 Series
Crossarm
Tripod Mast