Campbell CCFC Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 144

Campbell CCFC Скачать руководство пользователя страница 103

Table 14-27: Ethernet Power Modes

Power

mode

Operating characteristics

Always On

This power mode offers the maximum availability of the Ethernet port. If the
camera is in the Fully On power state or the Partially On power state, the Ethernet
port will always be on and available for communications.

Moderate

Power Save

Mode

This power mode offers some power savings on the Ethernet port. This mode is
only recommended if the camera is in Partially On power mode. If the camera is in
the Partially On power mode, incoming data packets will wake up the camera for
communications.

Full

Power Save

Mode

This power mode should be used if the lowest power consumption is desired and
incoming Ethernet communications are not required. File transfers after a capture
still function properly.

14.9.4.3 Wi-Fi Power Mode

Use Wi-Fi Power Mode to select how much power the camera uses when the camera is set to Wi-
Fi Access Point in the network settings. There are three power mode options to choose from.

FIGURE 14-42. Wi-Fi Power Mode

The default setting for the Wi-Fi Power Mode is Always On.

Table 14-28: Wi-Fi Power Modes

Power

Mode

Operating Characteristics

Always On Wi-Fi connection is always powered on.

Low

Power Save

Mode

Wi-Fi will only power up to transmit files after a capture event. A button press
enables the Wi-Fi for 5 min.

Attaching the external trigger wire (blue) to a power source (>2.5 VDC, maximum
30 VDC) turns the Wi-Fi on until power is removed.

CCFC Field Camera

97

«
...
101
102
103
104
105
...
»

Содержание CCFC

















































































































































Отзывы:

Нет отзывов