Raven X - Telus EV-DO Airlink Cellular Modem
following domain into the Domain and IPManager fields as
shown below. (eairlink.com)
7. Once these fields have been filled in click on the write button to
commit the changes to the modem. At this point the modem is fully
programmed to communicate to a Campbell Scientific datalogger
using a wireless IP connection.
8.
Turn off the power to the modem and disconnect from the PC. Turn
the power back on and the modem will register itself on the network
within 2 minutes. To confirm this, make sure that the Network and
Service light is solid. If the Network light is flashing the modem has
not registered. If the Service light is not lit but the Network light is,
the modem has registered on the network however there is no EV-DO
coverage and the modem has registered on the 1X network. If the
Modems Network light is not solid after this time contact Campbell
Scientific Canada at 780-454-2505 for advanced support.
6
Setup LoggerNet
1. Select Add Root | IPPort
2. Add a Datalogger to the IP Port
3.
On the IP Port page:
12
