Campbell 110PV, Инструкция по эксплуатации

Страница: 17 / 38

110PV Surface Temperature Probe
9
FIGURE 7-1. Types of PV modules
7.2 Mounting to a PV Module or Other Device
The 110PV includes an adhesive mounting strip adhered to the flat surface of
the aluminum disk. To mount the 110PV, remove the paper from the mounting
strip and adhere it to the back of the PV module or other device. The mounting
strip must be adhered to a clean surface for its adhesive to function properly.
If the temperature might exceed 70 °C, use Kapton tape (pn 27015) to secure
the probe to the measurement surface (see FIGURE 7-2 ).
PV module without
distinctive solar cells
PV module with
distinctive solar cells