l
The model number and cable length are printed on a label at the connection end of the
cable. Check this information against the shipping documents to ensure the expected
product and cable length are received.
l
The sensor is shipped with the cup wheel unattached to the anemometer shaft. Refer to the
Assembly and mounting the 03002
(p. 11) section.
4. QuickStart
A video that describes data logger programming using
Short Cut
is available at:
www.campbellsci.com/videos/cr1000x-datalogger-getting-started-program-part-3
.
Short Cut
is an easy way to program your data logger to measure this sensor and assign data logger wiring
terminals.
Short Cut
is available as a download on
. It is included in
installations of
LoggerNet
,
RTDAQ
, or
PC400
.
The following procedure shows using Short Cut to program the 03002.
1. Open
Short Cut
and create a new program.
2. Double-click the data logger model.
3. In the Available Sensors and Devices box, type 03002 or find the sensor in the Sensors >
Meteorological > Wind Speed & Direction folder. Double-click 03002 Wind Speed &
Direction Sensor. The wind speed defaults to meters/second. This can be changed by
clicking the Wind Speed box and selecting one of the other options.
Wind Sentry Series
2
