3
GETTING TO KNOW YOUR UNIT
Chuck
Air Inlet
Exhaust Port
Trigger
Ring
Forward/Reverse
Switch
Sleeve
SET UP INSTRUCTIONS
Plug
Quick
Coupler
Air Hose
* Items shown in Set Up Instructions are not included with this tool.
BEST PRACTICES
u
The air compressor used with your reversible drill must be able to maintain a
minimum of 90 PSI when the tool is being used. An inadequate air supply can
cause a loss of power and inconsistent tool output/performance.
u
A pressure regulator—used at the tool--is helpful to control the operating pressure
of the tool and maintain 90 PSI.
u
Use an oiler to provide oil circulation through the tool and a filter to remove liquid
and solid impurities which can rust or “gum up” internal parts of the tool.
u
To disconnect a coupler/plug from a system set-up: push the coupler and plug
together before pulling the coupler sleeve back and separating the coupler and
plug.
u
Make sure that the bits used with your pneumatic drill are heat-treated steel for
increased durability and longer life.