CL154000AV
www.campbellhausfeld.com
5
4. Carefully pull blade out of saw body
as shown in Figure 6.
5. To install new blade, insert blade in
slot in tool, tighten set screws on
each side of blade guides, and screw
cover onto tool.
aIR hose
Never carry a tool
by the hose or
pull the hose to move the tool or a
compressor. Keep hoses away from
heat, oil and sharp edges. Replace any
hose that is damaged, weak or worn.
Blade type
Material Being
Cut
Blade Type
Metal
Fine Tooth
wood
Coarse Tooth
Chart 2
RemovInG/chanGInG the saw
Blade
1. Disconnect tool from air supply.
2. Use a Phillips head screwdriver to
loosen cover screw (Figure 3).
3. Use a 4 mm hex wrench to loosen set
screws which secure sawblade in tool
(Figures 4 & 5)
Figure 3
Cover
Figure 4
Set Screw
Figure 5
Set Screw
Figure 6
Saw Blade
