![background image](http://html1.mh-extra.com/html/campbell-hausfeld/air-powered-flooring-nailer-stapler/air-powered-flooring-nailer-stapler_operating-instructions-and-parts-manual_3742709007.webp)
After unpacking the unit, inspect carefully
for any damage that may have occurred
during transit. Check for loose, missing
or damaged parts. Make sure to tighten
fittings, bolts, etc., before putting unit
into service. Check to be sure all supplied
accessories are enclosed with the unit. In
case of questions, damaged or missing
parts, please call 1-800-543-6400 for
customer assistance.
CoNteNtS IN tHe PlaStIC
CarryINg CaSe
u
Flooring Nailer/Stapler
u
Mallet with Rubber Head
u
2 in., 15.5 gauge L-Cleats (300 pieces)
u
2 in. x 1/2 in., 15.5 gauge Crown
Staples (320 pieces)
u
3 mm, 4 mm, and 5 mm Hex Wrenches
u
Nailer Oil
u
5/16 inch Plate for installing 1/2 inch
flooring
u
(3) Screws for installing 5/16 inch shoe
plate
u
Operating Instructions and Parts
Manual
u
Warranty Card
addItIoNal IteMS Not INCluded
u
Compressor (must be able to maintain
a minimum of 70 psi when the nailer is
being used)
u
Air hose
u
Small tool for clearing jams
u
Threadlock glue
u
30 W Non-detergent oil
u
ANSI Z87 eye protection
u
Small needle nose pliers
Read & Follow All Instructions
Save These Instructions
Do Not Discard
CHN50300
www.chpower.com
2 inch, 15.5 gauge L-Cleats (300 pieces) and
2 inch x 1/2 inch crown, 15.5 gauge Crown Staples (320 pieces)
Flooring Nailer / Stapler
Mallet with
Rubber Head
Nailer Oil
1/4 inch Plate for
installing 3/4 inch
flooring
5/16 inch Plate for
installing 1/2 inch
flooring
Unpacking
Figure 5