FT-253 Mini Element with Zen Frog Fountain
Revised February 8, 2019
Assemble your fountain on a level surface capable of holding a minimum of 30 pounds with an
approximate 1/2 square foot footprint.
FT-252C (17 lbs)
11.5”L x 6”W x 6”H
FT-252B (2 lbs)
4.5”L x 3.75”W x 4”H
FT-253A (4 lbs)
4”L x 6”W x 4.25”H
1.
Place the adhesive dots on the bottom of the basin to
protect furniture surface that fountain is to be placed on.
2.
Position the basin (FT-252C) where the fountain is to be
installed, ensuring that it is level.
3.
Using a hose clamp, secure one end of the 1/2” non-
kink tubing to the pump.
4.
Place the pump into the basin (FT-252C) so that the
cord comes up and out the back of the fountain.
5.
Using a hose clamp, place the other end of the tubing
onto the pipe protruding from the bottom/inside of the
pump cover (FT-252B).
6.
Place the pump cover (FT-252B) into the back of the
basin (FT-252C) so that the pipe protruding up from the
pump cover is facing up and the pump is hidden.
7.
Place the hole of the aluminum spiller/insert onto the
pipe sticking up out of the pump cover so that the lip is
spilling into the basin of the fountain.
8.
Place the birds (FT-253A) over the spiller insert.
9.
Attached the pump cord to the transformer.
10.
Fill the fountain with water.
