CAMPAGNOLO 11s, Техническое руководство

Страница: 6 / 12

CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL
6
3.4 - HOW TO SHORTEN THE CHAIN
Fig.5
• Prepare the tool UT-CN400 (12s) /
UT-CN300 (11s / 12s) by positioning the
tongue in open mode (X - Fig. 5)
- fit the link to be opened in tool UT-CN400
(12s) / UT-CN300 (11s / 12s) (Fig. 5)
taking care to end with an internal link:
- clamp the link with the special clam-
ping device (Z) (Fig. 6);
UT-CN400
UT-CN300
X
Fig.7
Fig.8 Fig.9
- Tighten the tool until the small pin
emerges completely from the hole in the
link (Fig. 7).
3.5 - INSERTING THE ULTRA-LINK 5-CN-RE600 BUSHING (12s) / 5-CN-RE500 BUSHING (11s)
• Remove the plastic band and the adhe-
sive “Warning” label.
• To install the closing pin ULTRA-LINK
5-CN-RE500 (11s) / 5-CN-RE600 (12s),
place the chain on the bottom bracket
shell.
• Insert the inner link (B - Fig. 8) into the
outer link (C - Fig. 8), and then insert the
guide of the rivet ULTRA-LINK 5-CN-
RE500 (11s) / 5-CN-RE600 (12s) (D -
Fig. 8) into the hole of the link from the
inside of the chain towards the outside.
• Move the chain on to the larger chain-
ring (keeping it on the smallest sprocket),
then position the links to be closed in the
area indicated in Figure 9.
External side of the chain
D
C B
Z
Fig.6
CHAIN - Rev. 06/ 02-2021