Pag. 18
Use and maintenance manual – Translation of
original Instruction Rev.: 01, Date 01/02/2022
The CE marking is unique and certifies the compliance of the product with the machinery directive and other
applicable directives according to the conditions prescribed and reported in this manual.
In the case of a "composite" machine / tool, a CE plate / label is attached to the product and a label in sticked on
the tool to identify the type of tool (eg. ATRA.xxxx) constituting the composite machine / tool
The customer is responsible for verifying the integrity of the CE plate / label.
The user is required to replace the CE plate and / or the warning plates which, due to wear, have become illegible.
It is absolutely forbidden to remove the plates / labels from the machine / tool. Campagnola S.r.l. declines all
responsibility for the safety of the machine / tool if this prohibition is neglected
The identification details of the tool are shown on the sticker of the battery and of the CE declaration of conformity attached
to the manual.
3.2 Product description
The power unit has been designed in order to power-supply some of the Manufacturer’s electro-mechanical tools. The tool
compatibility with the battery has to be checked in the power-supply details inside the corresponding manuals.
The unit is based on a battery set (2), a back-pack (3) and a connecting cable (1).
The power-supply unit is fitted with batteries with Lithium cells (2). An electronic card in the battery checks the charging and
discharging steps to improve performance and quality.
The battery is inside a box (picture A) and is hooked to a backpack (3) which is fitted with braces and worn by the operator.
The best performance in terms of battery autonomy is reached after a few recharging cycles.
3.3 Parts supplied
Use and maintenance manual.
Battery-charger with its own Use & Maintenance Manual.
3.4 Recommended use
The unit was designed for pruning according to the manners and limits previously described.
•
Any other use has to be considered improper and potentially dangerous for the operators’ safety. This would
make any warranty claims void.
•
If it is not used for the purposes it was designed for, the unit may cause serious injuries to personnel and
bystanders and damages to equipment and things.
3.5 Composition of the unit
Pos.
Description
Function
Pict.
1
Power supply cable
Connects the power unit with the battery
B
2
Battery
Power supply the tool
A
3
Backpack
Allows to carry the battery
B
4
ON/OFF
button
Turns the battery on and off
A
5
Charge connector
Allows to charge the battery
B
6
Cable connector
Connects the cable to the battery
A
7
Battery display
Allows to check the charge level
A
8
ON/OFF
Led light
Shows if the battery is on or off
A
9
Fixing slots
Allow to fix the battery to the backpack
C
10
Fixing supports
Allow to fix the battery to the backpack
A
3.6 Technical details
Battery weight:
3.7 Kg
Battery voltage:
50.4 V
Battery:
Lithium ion
Average battery charge time:
8-9 hours
Battery endurance:
8 hours (*)
Automatic electronic battery charger model:
SBC1402A (14S)
(*) This detail depends on the kind of use, of tree and of connected tool.
Содержание Li-Ion 700
Страница 3: ...Manuale Uso e Manutenzione Istruzioni Originali Rev 01 Data 01 02 2022 Pag 3 ...
Страница 50: ......
Страница 51: ......