CAMPAGNOLA KRONOS, Руководство по эксплуатации и обслуживанию

Страница: 30 / 332

Use and maintenance manual – Translation of
original Instruction. : 01 date 15/12/2021
Page 29
3.6 Technical data
• Bar length: 10”
• 10” bar maximum cut: Ø 150 mm
• Cutting chain: 1/4"
• Active safety device: Yes
• Automatic bar lubrication: Yes
• Battery voltage: 58 V
• Motor: Brushless
• Power: 1200 W
• Consumption: 20-25 Ah
• Cut quantity with Li-ion 700 battery: Over 600 cuts of 10 cm Ø
• Speed: 6 choices
• Chain speed: from 11.4 m/sec to 14.8 m/sec
• Two-tone LED light: green color to indicate the tool switching on, red color for the
maximum consumption
• Switch: ON/OFF
• Overall tool length: 1300 mm / 1900 mm
• Weight of 1300 mm tool: 3.250 kg.
• Weight of 1900 mm tool: 3.750 kg.
3.7 Safety devices
• ON/OFF switch (5): Switches the tool on and off.
• ON/OFF LED light (12): Indicates whether the tool is working.
• Active safety device (8): Engages itself automatically when releasing the operating lever and prevents from any acci-
dental tool operation.
• Bar guard (3): Protects the cutting bar during transport.
• Built-in protecting device: Protects in case of motor overheating.
• Built-in protecting device: Protects in case of max current consumption.
Pos. Denomination Function
1
Handle Allows to hold the tool
2 Front guard Protects the pinion and the bar chain
3 Bar guard Protects the chain when the tool is not used
4 Control keyboard Drives the tool operations
5 ON/OFF switch Switches the tool on and off
6 +/- speed selector Adjusts the cutting chain speed
7 Operating lever Is pressed to operate the tool
8 Active safety device Controls the operating lever
9 Power-supply cable connector Connects the tool to the battery
10 Support handle Allows the operator to hold the tool while working
11 Plug Allows to add oil to the reservoir
12 Power LED light Shows whether the tool is on or off
13
Power-supply cable Connects the tool to the battery
14 Locking nut Locks the bar
15 Bar Drives the cutting chain
16
Chain Cuts branches, trunks, etc
17
Adjusting screw Adjusts the chain tension
18
Motor body Is the seat of the motor and the electronic boards
19
Serial number sticker Shows the tool identifying details
20
Lubricating oil reservoir Contains the oil for the bar and chain lubrication
21
Electronic board Drives the tool functions
22
Brushless motor Gives motion to the chain
23 Fixed extension pole Supports the tool and makes easier working from the ground
24 Branch-pulling hook Helps the operator to clean the cutting area
26
Extension pole anti-rotation screw Avoids extension pole rotations
27 Power unit clamp screw Locks the extension pole on the power unit
28 Cutting unit anti-rotation screw Avoids rotations of the cutting unit on the extension pole
29
Cutting unit clamp screw Locks the cutting unit on the extension pole