ENGLISH
Campagnola Srl
–
USE AND MAINTENANCE MANUAL
–
Translation of the original Instructions
Ver.1.0 - Rev.: 00, Date: 10/10/2014
Pag.15
SAFETY PRECAUTIONS
2.3 Use
•
Use the tool just for the purposes indicated in ch.
“Product description”. Any other kind of use may cause injuries.
•
Always check that the safety devices are perfectly efficient.
•
Never use the tool if it is damaged, wrongly regulated or only partially assembled.
•
Always wear goggles or a visor, safety shoes, anti-vibration gloves and a noise-abatement headset (picture A).
•
The working position must be stable and safe.
•
Do not leave the tool in the rain. Keep it in a dry place.
•
Do not carry the tool by the power supply cable.
•
The same operator shall not use the tool for a prolonged time. Two operators shall alternate working for one hour and then
having a one-
hour’s break. A prolonged use could be excessively tiring.
•
When the tool is not used, select the OFF mode with the ON/OFF switch.
2.4 Maintenance
WARNING!
Before performing any maintenance operations or adjustments on the mechanical parts of the equipment, put on
heavy-duty work shoes, protective gloves and goggles.
•
Routine maintenance and repairs can be carried out only by an
operator
with the necessary physical and intellectual
qualifications.
•
Special maintenance and repairs can be carried out only by a
qualified mechanic
.
•
Before any maintenance or adjustment operations, disconnect the tool from its power source.
•
Keep bystanders away when servicing or repairing the machine.
•
Only
qualified mechanics
are authorised to inactivate the safety devices provided on the machine when maintenance is
to be performed. It is their responsibility to safeguard the operators and the machine. The safety devices should be
activated as soon as maintenance work has been completed.
•
All maintenance procedures not dealt with in this manual are to be performed at CAMPAGNOLA Authorised Service
Points.
•
When maintenance or repairs have been completed, the machine can be started again only if duly authorised by the
qualified mechanic
. The service mechanic must make sure:
-
work has been completed;
-
the machine runs in a trouble-free manner;
-
the safety devices are activated;
-
no one is working on the machine.
3. SPECIFICATIONS
3.1 Product identification
The tool identification details are indicated on the CE sticker (4)
4
3.2 Product description
The mechanical head is the top part of an electromechanical harvesting tool manufactured by CAMPAGNOLA S.r.l..
An electro-mechanical harvester is composed of three main parts: the harvesting head, the extension pole and the power unit.
For more details, read the power unit manual.
The mechanical head can be connected either to a fixed extension pole (11) or to a long or medium telescopic one (12).
The various combinations are indicated in par. 2.1 of the power unit manual.
The tool harvesting head makes fruit fall down thanks to its rake (2) rotating movement among the branches.
The rake (2) is made of techno-polymer and fitted with teeth (1). It is extremely light and resistant and makes a rotating
movement.
The rake (2) movement is generated by a motor and is transmitted to the harvesting head by means of an extension pole (11-
12) (read the power unit manual).
The mechanical head includes the cinematic mechanism operating the rake movements, the rake (2) and its holder.
All information about the harvesting head and teeth (1) operating system can be found in the manual of the chosen power unit.
WARNING!
Please remember that the tool has been manufactured only for the purposes described in this manual.
Code number
Serial number
Production year
Campagnola Srl
–
USE AND MAINTENANCE MANUAL
–
Translation of the original Instructions
Ver.1.0 - Rev.: 00, Date: 10/10/2014
Pag.16
SPECIFICATIONS
IMPORTANT:
The best battery autonomy performance is reached after the first 20 work hours.
3.3 Parts supplied
Use and maintenance manual
3.4 Recommended use
The tool has been manufactured for olive and coffee beans harvesting, to be carried out according to the above-mentioned
ways and limits
.
WARNING!
•
Any other use has to be considered improper and potentially dangerous for the operators’ safety. This would then make
any warranty claim void.
•
If it is not used for the purposes it was manufactured for, the tool may get damaged and cause serious injuries to
personnel and bystanders and damages to things.
3.5 Tool composition
POS. DENOMINATION
FUNCTION
1
Tooth
Moves among the branches to make fruit fall down
2
Complete rake
Moves among the branches to make fruit fall down.
3
Extension pole fixing clamp
Fixes the mechanical head onto the extension pole
4
Identification sticker
Shows the identification details
5
Clamp screws
Fix the clamp on the extension pole
6
Teeth holder fixing screws
Allow to lock the teeth holder onto the mechanical head
7
Teeth holder
Is the seat of the teeth
8
Oscillator
Creates the rotating movement of the mechanical head
9
Oscillating mass
Reduces the mechanical head vibrations
10
Oscillator drive
Guides the oscillator
11
Fixed extension pole
Holds the tool
12
Telescopic extension pole
Holds the tool
3.6 Technical details
Weight:
870 g
Rake speed:
1080-1150 rpm
3.7 Symbols and warnings
General warning
Compulsory feet protectioni
Compulsory hands protection
Compulsory use & maintenance
manual reading
Compulsory head protection
Compulsory adequate clothing
4. INSTALLATION
4.1 Connection to an extension pole
Assemble the tool onto an extension pole (11-12), insert the shaft and tighten the screws (5) of the clamp (3).
4.2 Control devices
All information can be found in the use and maintenance manual of the power unit.
Campagnola Srl - USE AND MAINTENANCE MANUAL - Translation of the original Instructions
Pag. 18
Ver.1.0 - Rev.: 00, Date: 10/10/2014
Содержание HERCULES
Страница 2: ...1 7 5 3 2 6 6 10 8 9 Fig A 4 11 12 ...
Страница 3: ...Italiano 6 English 16 Español 26 Français 36 Ελληνικά 46 Türkçe 56 Português 66 ...
Страница 74: ......