Camp 4 ORLANDO Series, Руководство пользователя

Страница: 9 / 10

48 17
Retest after fixing the fault
Turn OFF the gas at the cylinder after testing.
If leakage is detected and cannot be rectified, do not attempt to cure leakage but consult your gas dealer.
LIGHTING YOUR BARBECUE
Lighting Instructions (Main grill burners):
Connect the gas tap to the burner inlet by following the assembly instruction.
Turn the control knob clockwise to “OFF” position.
Connect the regulator to the gas bottle. Turn the gas supply “ON” at the cylinder. Check with the use
of soapy water for any gas leakage between the bottle and the regulator and the gas valve
Push down the control knob and keep pressing whilst turning anti-clockwise to the “Full rate” position
whilst pressing the ignition button, this will light the burner. If the burner does not light, repeat this
process.
If the burner has not light after two attempts, turn off the gas tap, wait 5 minutes and then repeat step
3.
When the burner is lit. Adjust the heat by turning the knob to the High/Low position.
To turn the barbecue ‘OFF’ turn the cylinder valve or regulator switch to the ‘OFF’ position and then turn
all of the control knobs on the appliance clockwise to the ‘OFF’ position when the flame have extinguis-
hed.
Warning: If the burner fails to ignite, turn the control knob off (clockwise) and also turn the cylinder valve
before attempting to relight with ignition sequence.
Always wait for the appliance to cool down before attempting to latch the lid in the closed position for
transport.
Before cooking for the first time, operate the barbecue for about 15 minutes with the lid closed and the gas
turned on HIGH. This will “heat clean” the internal parts and dissipate odor from the painted finish.
Clean your barbecue after each USE. DO NOT use abrasive or flammable cleaners, as it will damage the
parts of the product and may start a fire. Clean in warm soapy water.
WARNING: Accessible parts may be very hot. Keep young children away from the hot appliance at all
times (even while cooling down!). It is recommended that protective gloves (eg oven gloves) be used when
handling particularly hot components.
1.
2.
3.
4.
5.
6.
7.
MonTaGE- & användnInGSInSTrUkTIon
orlando 30 mbar - FlyTTBar GaSolGrIll
Felaktig installation, justeringar, förändringar, service och underhåll kan orsaka person- eller sakska-
dor.
Läs omsorgsfullt igenom installations-, användnings- och underhållsinstruktionerna, innan du instal-
lerar eller använder denna produkt.
Ett uraktlåtande av dessa instruktioner kan orsaka brand eller explosion med sak- eller personska-
dor eller i värsta fall dödsfall till följd.
1.
2.
3.
VARNING
FÖR DIN EGEN SÄKERHET ANVÄNDS ENDAST UTOMHUS
(UTAN NÅGON INRAMNING)