Camp 4 ORLANDO Series, Руководство пользователя

Страница: 7 / 10

50 15
SITING THE APPLIANCE
The appliance must be sited with at least a 1 meter gap between both sides of the appliance and rear of the
appliance and at least 1 m from the cooking grid of the appliance and any combustible or non-combustible
materials.
The appliance and the gas cylinder must be placed on a flat level hard surface when in use. If used on the
ground in an area with long grass ensure that the grass is not long enough to enter under the appliance as
this could result in the grass catching fire.
CONNECTING THE GAS CYLINDER TO THE APPLIANCE
This appliance is only suitable for use with low-pressure butane or propane gas or LPG mixtures, fitted with
the appropriate low-pressure regulator via a flexible hose. The hose should be secured to the regulator and
the appliance with hose clips. This barbecue is set to operate with a 28 mbar regulator with butane gas and
a 37mbar regulator with propane gas or 30 mbar for LPG mixtures. Use a suitable regulator certified to
BSEN 12864: 2001. Please consult your LPG dealer for information regarding a suitable regulator for the
gas cylinder. The appliance is suitable for use with gas cylinders of 3.9 kg to 15 kg gas capacity.
REGULATOR AND HOSE
Use only regulators and hose approved for LP Gas at the above pressures. The life expectancy of the regula-
tor is estimated as 10 years. It is recommended that it the regulator is changed within 10 years of the date
of manufacture.
The use of the wrong regulator or hose is unsafe; always check that you have the correct items before
operating the barbecue.
The hose used must conform to the relevant standard for the country of use. The length of the hose must be
1.5 meters (maximum). Worn or damaged hose must be replaced. Ensure that the hose is not obstructed,
kinked, or in contact with any part of the barbecue other than at its connection.
STORAGE OF APPLIANCE
Storage of an appliance for transport or indoors is only permissible if the cylinder is disconnected and
removed from the appliance. When the appliance is not to be used for a period of time it should be stored in
its original packaging and stored in a dry dust free environment.
GAS CYLINDER
The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the cylinder must
be disconnected. Replace the protective cap on the cylinder after disconnecting the cylinder from the
appliance.
Cylinders must be stored outdoors in an upright position and out of the reach of children. The cylinder must
never be stored where temperatures can reach over 50°C. Do not store the cylinder near flames, pilot
lights or other sources of ignition. DO NOT SMOKE.
This barbecue is designed for use outdoors, away from any flammable materials. It is important that there
are no overhead obstructions and that there is a minimum distance of 1 m from the side of the appliance. It
is important that the ventilation openings of the appliance are not obstructed. The barbecue must be
used on a level, stable, non-flammable surface. The appliance should be protected from direct draughts and
shall be positioned or protected against direct penetration by any trickling water (e.g. rain).
Parts sealed by the manufacturer or his agent must not be altered by the user. No modifications should
be made to any part of this barbecue and repairs and maintenance should only be carried out by a CORGI
registered service engineer.
CONNECTION TO APPLIANCE
Before connection, ensure that there is no debris caught in the head of the gas cylinder, regulator, burner
and burner ports.
Spiders and insects can nest within and clog the burner/venturi tube at the orifice. A clogged burner can
lead to a fire in the appliance.
Sprängskiss