Camouflage EZ2, Руководство пользователя, Страница: 9 / 32

- 8 -
Before Operation
Power supply
Batteries installation
Open the camera by unlocking the latch firstly. The battery compartment
is the right part of the camera. Open the protective cover of the battery
compartment and insert 4 x 1.5 V LR6/AA batteries into the battery slots.
Make sure to insert each battery with the correct polarity (+ and - end
against the long spring of each battery slot).To increase the operating
time, you can use 8 x 1.5 V LR6/AA batteries. When using 4 batteries,
they all should be installed in the top 4 slots or the bottom 4 slots.
Note:
NEVER INSTALL DIFFERENT TYPES OF BATTERIES or NEW
AND OLD BATTERIES in the product at the same time. Also do not
use rechargeable batteries.
Anytime you load or unload batteries, make sure that the camera is
OFF . If using an external power source, do not remove internal
batteries.
Using an external power source
Optionally, you can connect an external 6V 1.5
～
2.0A DC power source
to the “DC In” jack at the bottom of the camera. The power connector is
a 3.5x1.35 mm coaxial DC power plug with positive ’tip’ (inside pin)
polarity. Leave internal batteries in the camera during use.