manualshive.com logo in svg

Camoplast TATOU 4S ATV, Руководство пользователя, Страница: 4 / 53

Поделиться
Скачать
Camoplast TATOU 4S ATV Скачать руководство пользователя страница 4

1

INTRODUCTION

INTRODUCTION

Thank you for choosing Tatou

®

 4S, a Camoplast ATV Track

System, (hereinafter referred to as the "System"). You have
made the right choice. This system will provide you with all the
traction, performance and durability you require for recreational
or work purposes and allows for year-round operation. This
track system for quads (hereinafter referred to as the "ATVs")
provides exceptional floatation with very low ground  pressure.
Its strong lightweight steel frame (30 kg), its internal sprockets,
adapted to the vehicle’s capacity, and its track, specifically
designed for ATVs, make it the best system on the market.

USING THE ATV WITH TRACKS

 

The driver must remain vigilant and cautious at all times.
Powder snow and mud can hide dangerous obstacles. 

The driving characteristics of your ATV will change with the
installation of the System. It is important to take the time to
become familliar with the Systems.

Before each ride make sure that all the wheels and moving
parts of the system are free and that they are not frozen or
stuck on to the frame.

It is the driver’s responsibility to verify that the air intake of
the vehicle is well adapted to weather conditions and is not
blocked by snow accumulation.

When travelling in groups, people driving behind vehicles
equipped with a track system should by warned, as the
tracks can propel dangerous objects. Be especially

cautious on “rocky” trails. 

Adapt your driving style to surrounding conditions
(weather, traffic, etc.) and to your driving abilities.

An ATV equipped with the System must never be used for
the following activities: races, rallies, jumps, stunts,

acrobatics or any other extreme applications.

Allow for a greater braking distance and periodically apply
the brakes while driving to prevent ice buildup on brake
components.

Содержание TATOU 4S ATV






















































Отзывы:

Нет отзывов